Worcester Greenstar CDi Classic Boiler Reset
To bleed your radiators you will need the following tools:
- Press the reset button [2] for three seconds.
- The reset button [2] and the fault indicator [3] will stop flashing.
If the reset was successful the boiler will return to normal operation.
If the reset was not successful then the alert code will be displayed again, and the blue operation/fault light will continue to flash.
Worcester Greenstar Si & CDi Compact Boiler Reset
- To reset the boiler, press “Reset”.
- “Reset” and a tick is briefly displayed.
If the reset was successful the boiler will return to normal operation.
If the reset was not successful then the alert code will be displayed again, and the blue operation/fault light will continue to flash.
Worcester Greenstar i Boiler Reset
- To reset the appliance, press reset briefly once.
- “Reset” and a tick is briefly displayed.
If the reset was successful the appliance will return to normal operation.
If the reset was not successful then the alert code will be displayed again, and the blue operation/fault light will continue to flash.
Worcester Greenstar i Junior Boiler Reset
In the event of a fault, the reset button will flash once per second and the blue mains indicator light will flash.
- To reset the boiler press the reset button for approximately five seconds. When the boiler resets the reset button will no longer be illuminated.
- The mains indicator will no longer be flashing.
Worcester Greenstar Ri Boiler Reset
In the event of a fault, the blue mains indicator light will flash if there is a fault.
- To reset the boiler turn the Central heating temperature knob anticlockwise to the “RESET” position and hold for approximately five seconds and then turn the knob back to the original temperature setting.
- When the boiler resets the mains indicator will no longer be flashing and the boiler will function normally, dependant on the programmer and room thermostat settings. A reset fault condition will exist If the electrical power to the boiler has been interrupted. Reset the boiler as described above.
Is your boiler still not working?
Sometimes, unfortunately, resetting your boiler is not enough to get it back up and running again. If your boiler keeps going back into fault mode you will now need to call a Gas Safe engineer.
AB Plumbing & Heating have Gas Safe engineers on hand to come to your rescue, we can diagnose and repair your boiler quickly and efficiently.